STG74S-E1G000-1-0-AHS-11C-B-11A0-F1-0000
- Product SKU: STG74SE1G00010AHS11CB11A0F10000
- Category: Honeywell Smart Transmitters, Pressure Sensors
Honeywell Smart Pressure transmitter STG74S are suitable for monitoring, control and data acquisition featuring piezo resistive sensor technology combining pressure sensing with on chip temperature compensation capabilities providing high accuracy, stability
and performance over a wide range of application pressures and temperatures.
Specifications :
- Accuracies up to 0.065% of span
- Stability up to 0.020% of URL per year for 10 years
- Automatic temperature compensation
- Rangeability up to 100:1
- Response times as fast as 100ms
- Easy to use and intuitive display capabilities
- Intuitive External Zero, Span and configuration
- capability
- Comprehensive on-board diagnostic capabilities
- Integral Dual Seal design for safety based on
- ANSI/NFPA 70-202 and ANSI/ISA 12.27.0
Model Decodification :
Honeywell Smart Pressure Transmitter
STG74S : Range: 0 to 35 Bar
E: Process Head/Reference Head Material : 316 Stainless Steel, Barrier Diaphragm Material :316L SS
1 : Fill Fluid : Silicone Oil 200
G : Process Connection 1/2" NPT (female), Material : 316 Stainless Steel
0 : Bolt/Nuts Materials : None
0 : Vent/Drain Type/Location : None
0 : Gasket Materials : None
1 : Meter Body & Connection Orientation : Standard, High Side Left, Ref Side Right2 / Std Head Orientation
0 : No Approvals Required
A : Electronic Housing Material :Polyester Powder Coated Aluminum , Connection Type: 1/2 NPT ,Lightning Protection : None
H : Output/ Protocol :4-20mA/HART
S : Indicator :Zero,Span&Config buttons),Ext Zero,Span & Config Buttons : None,Languages : EN
1 : Application Software : Standard Diagnostics
1 : Write Protect : Disabled, Fail Mode : High> 21.0mAdc, High & Low Output Limits : Honeywell Std (3.8 - 20.8 mAdc)
C : Custom Configuration (Unit Data Required from customer)
B : Accuracy and Calibration : Standard And Custom (Unit Data Required)
1 : Bracket Type :Angle Bracket ,Material :Carbon Steel
1 : Customer Tag : One Wired Stainless Steel Tag
A0 : No Conduit Plugs or Adapters Required
F1 : Calibration Test Report & Certificate of Conformance
0000 : Factory Identification
Honeywell Smart Pressure transmitter STG74S are suitable for monitoring, control and data acquisition featuring piezo resistive sensor technology combining pressure sensing with on chip temperature compensation capabilities providing high accuracy, stability
and performance over a wide range of application pressures and temperatures.
Specifications :
- Accuracies up to 0.065% of span
- Stability up to 0.020% of URL per year for 10 years
- Automatic temperature compensation
- Rangeability up to 100:1
- Response times as fast as 100ms
- Easy to use and intuitive display capabilities
- Intuitive External Zero, Span and configuration
- capability
- Comprehensive on-board diagnostic capabilities
- Integral Dual Seal design for safety based on
- ANSI/NFPA 70-202 and ANSI/ISA 12.27.0
Model Decodification :
Honeywell Smart Pressure Transmitter
STG74S : Range: 0 to 35 Bar
E: Process Head/Reference Head Material : 316 Stainless Steel, Barrier Diaphragm Material :316L SS
1 : Fill Fluid : Silicone Oil 200
G : Process Connection 1/2" NPT (female), Material : 316 Stainless Steel
0 : Bolt/Nuts Materials : None
0 : Vent/Drain Type/Location : None
0 : Gasket Materials : None
1 : Meter Body & Connection Orientation : Standard, High Side Left, Ref Side Right2 / Std Head Orientation
0 : No Approvals Required
A : Electronic Housing Material :Polyester Powder Coated Aluminum , Connection Type: 1/2 NPT ,Lightning Protection : None
H : Output/ Protocol :4-20mA/HART
S : Indicator :Zero,Span&Config buttons),Ext Zero,Span & Config Buttons : None,Languages : EN
1 : Application Software : Standard Diagnostics
1 : Write Protect : Disabled, Fail Mode : High> 21.0mAdc, High & Low Output Limits : Honeywell Std (3.8 - 20.8 mAdc)
C : Custom Configuration (Unit Data Required from customer)
B : Accuracy and Calibration : Standard And Custom (Unit Data Required)
1 : Bracket Type :Angle Bracket ,Material :Carbon Steel
1 : Customer Tag : One Wired Stainless Steel Tag
A0 : No Conduit Plugs or Adapters Required
F1 : Calibration Test Report & Certificate of Conformance
0000 : Factory Identification
Futuristic believes & will help its customers as far as possible, and has therefore a liberal cancellation policy.
Cancellations :
– Please send an email at sales@futuristicclimatecontrols.in
- Cancellation will be accepted only if the product does not meet the specifications mentioned on our portal.
Return Policy :
If you think, you have received the product in a bad condition or if the packaging is tampered with or damaged before delivery, please refuse to accept the package and return the package to the delivery person. Also, please call our customer care at +91 9723810294 or email us at sales@futuristicclimatecontrols.in mentioning your Order ID. We will personally ensure that a brand new replacement is issued to you with no additional cost. Please make sure that the original product tag and packing is intact when you send us the product back.
Apart from the condition reserved herein above, the following products shall not be eligible for return or replacement, viz:
- Any product that exhibits physical damage to the box or to the product;
- Any product that is returned without all original packaging and accessories, including the retail box, manuals, cables, and all other items originally included with the product at the time of delivery;
- Any product without a valid, readable, untampered serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number;
- The refund does not include any service or manpower involved while installation, erection, commissioning, training or any such similar activity;
Replacements :
– If you have received the product, it will be eligible for repair/replacement, only in cases where there are defects found with the product. Replacement will be possible only if you ship the product to our office address, all courier charges borne by you. In case of out of country customers, there will be an additional courier charge for the return of the item to the customer country/city.
– All deliveries are F.O.R. Ahmedabad Airport, India. However, all customs & import duties are to be borne by the customer at the country of import. In case of return, the customs & import duties of our country ( India ) , if charged by the authorities, will be deducted from the refund amount. In case of repair, the import/custom duties as levied by Indian Authorities will be to Customer Account.
- In case of complaints regarding products that come with a warranty from manufacturers, please refer the issue to the concerned manufacturer. Let us know & we’ll help you regarding the same
- Replacement will not be valid if the Instrument is tampered or used without following the instruction procedures as mentioned in User manual.
Refund :
Refunds will be made in the same form or by most convenient form ,that the payment is received, within 10 – 15 working days from the date of cancellation of order. However a levy of 3% will be charged towards payment processing charges (Payment Gateway Charges).
