DBC2000
- Product SKU: DBC2000
- Category: Burner Sequence Controllers, Gas Burner Controls, Honeywell - Gas Burner Controls
Honeywell Burner Sequence Controller DBC2000 is programmed to provide a level of safety, functional capability and features beyond the capacity of conventional controls.
FEATURES
· Employs a plug-in mounting method
· Uses a microprocessor to improve performance
· The progress of the sequence can be easily determined by status indicator LEDs
· All models have a 4-wire firing rate switching circuit to control an air damper or other auxiliary equipment during startup of the burner.
· Safe start check before and during pre-purge
· Safety shutdown occurs on
- malfunction of the burner controller
- failure to ignite the pilot burner or main burner
- loss of flame during run period
- opening of air flow switch during pre-purge, start-up, run and post-purge period
- flame signal detection during standby or prepurge period
· Remote communication (Enhanced model only)
· Valve Proofing System (Enhanced model only)
Mains input: Supply voltage
220 to 240Vac -15% +10% 50/60Hz or
110 to 120Vac -15% +10% 50/60Hz
Allowable ambient Temperature & Humidity
-10 °C; +60°C
90% RH max. at 40°C (non condensing)
Approvals
CE certification to standard EN298:2003
CE certification to standard EN230:2005
Additional approvals:
Lloyds (planned)
EN746-2 compliant
PED (planned)
SIL2 (planned)
Apave (planned)
Power consumption
9VA
Protection class
IP40
Vibration
0.5G
Mounting
Plug-in mounting method using sub-base
Dimensions
103mm x 103mm x 124mm (W x D x H) incl. sub base
Status indicator LEDs
- Standby
- Purge
- Ignition
- Pilot
- Main
- Modulate
- Flame On
- Alarm
Honeywell Burner Sequence Controller DBC2000 is programmed to provide a level of safety, functional capability and features beyond the capacity of conventional controls.
FEATURES
· Employs a plug-in mounting method
· Uses a microprocessor to improve performance
· The progress of the sequence can be easily determined by status indicator LEDs
· All models have a 4-wire firing rate switching circuit to control an air damper or other auxiliary equipment during startup of the burner.
· Safe start check before and during pre-purge
· Safety shutdown occurs on
- malfunction of the burner controller
- failure to ignite the pilot burner or main burner
- loss of flame during run period
- opening of air flow switch during pre-purge, start-up, run and post-purge period
- flame signal detection during standby or prepurge period
· Remote communication (Enhanced model only)
· Valve Proofing System (Enhanced model only)
Mains input: Supply voltage
220 to 240Vac -15% +10% 50/60Hz or
110 to 120Vac -15% +10% 50/60Hz
Allowable ambient Temperature & Humidity
-10 °C; +60°C
90% RH max. at 40°C (non condensing)
Approvals
CE certification to standard EN298:2003
CE certification to standard EN230:2005
Additional approvals:
Lloyds (planned)
EN746-2 compliant
PED (planned)
SIL2 (planned)
Apave (planned)
Power consumption
9VA
Protection class
IP40
Vibration
0.5G
Mounting
Plug-in mounting method using sub-base
Dimensions
103mm x 103mm x 124mm (W x D x H) incl. sub base
Status indicator LEDs
- Standby
- Purge
- Ignition
- Pilot
- Main
- Modulate
- Flame On
- Alarm
Futuristic believes & will help its customers as far as possible, and has therefore a liberal cancellation policy.
Cancellations :
– Please send an email at sales@futuristicclimatecontrols.in
- Cancellation will be accepted only if the product does not meet the specifications mentioned on our portal.
Return Policy :
If you think, you have received the product in a bad condition or if the packaging is tampered with or damaged before delivery, please refuse to accept the package and return the package to the delivery person. Also, please call our customer care at +91 9723810294 or email us at sales@futuristicclimatecontrols.in mentioning your Order ID. We will personally ensure that a brand new replacement is issued to you with no additional cost. Please make sure that the original product tag and packing is intact when you send us the product back.
Apart from the condition reserved herein above, the following products shall not be eligible for return or replacement, viz:
- Any product that exhibits physical damage to the box or to the product;
- Any product that is returned without all original packaging and accessories, including the retail box, manuals, cables, and all other items originally included with the product at the time of delivery;
- Any product without a valid, readable, untampered serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number;
- The refund does not include any service or manpower involved while installation, erection, commissioning, training or any such similar activity;
Replacements :
– If you have received the product, it will be eligible for repair/replacement, only in cases where there are defects found with the product. Replacement will be possible only if you ship the product to our office address, all courier charges borne by you. In case of out of country customers, there will be an additional courier charge for the return of the item to the customer country/city.
– All deliveries are F.O.R. Ahmedabad Airport, India. However, all customs & import duties are to be borne by the customer at the country of import. In case of return, the customs & import duties of our country ( India ) , if charged by the authorities, will be deducted from the refund amount. In case of repair, the import/custom duties as levied by Indian Authorities will be to Customer Account.
- In case of complaints regarding products that come with a warranty from manufacturers, please refer the issue to the concerned manufacturer. Let us know & we’ll help you regarding the same
- Replacement will not be valid if the Instrument is tampered or used without following the instruction procedures as mentioned in User manual.
Refund :
Refunds will be made in the same form or by most convenient form ,that the payment is received, within 10 – 15 working days from the date of cancellation of order. However a levy of 3% will be charged towards payment processing charges (Payment Gateway Charges).